HYDRALOOP CASCADE PRODUCT DATA SHEET
Find the other factsheets for your desired device here
With the scalable and made to measure Hydraloop Cascade system, you can recycle up to 45% of in-house water. A Hydraloop Cascade can treat and redistribute Hydraloop resuable water from shower, bath, hand basins, and optionally washing machine (only with optional inlet diverter valve) as well as condensation water from tumble dryer, heat pump, and air conditioning. Due to its innovative and breakthrough technology, Hydraloop resuable water is clean, clear, safe and certified. You can reuse it for toilet flushing, washing machine, garden irrigation and/or swimming pool top-up. The maintenance requirements and corresponding costs are very low.
The Hydraloop Cascade can be assembled by configuring two or more Hydraloop devices in any cascade arrangement. Depending on the building and the application, one central location can be chosen in the building for one cascade configuration. Or several locations with 2 or more compact cascade configurations.
Each Hydraloop device in the cascade set up works independently in the cleaning process. The treated and disinfected reusable water is stored in one volume which is formed by the interconnected individual water storage tanks of the Hydraloop devices. Treatment and storage tanks form one integral cluster. A powerful booster pump redistributes the reuseable water in the building to be used for toilet flushing and garden irrigation. In case of a temporary shortage of reusable water, the system automatically switches to its backup water source like tap water or rainwater.
An online information system is available for real-time status information and performance.
EXAMPLE: HYDRALOOP CASCADE 14 DURING 3-MONTH PERIOD
HYDRALOOP CASCADE
|
Input |
|
|
Output |
1 outlet for reusable water for each Hydraloop cluster for toilet flushing and irrigation. |
|
Colour |
Stone |
|
Front Plate |
Stainless-steel front plate with white coloured logo and status light. |
HYDRALOOP SPECIFICATIONS
|
Treatment capacity |
Scalable from 1060 liters | 280 gallons per day up to 10,600 liters | 2800 gallons per cluster Multiple Hydraloop Cascade clusters can be installed |
|
Voltage |
100 | 240 Volt, 24 Volt internal |
|
Internet |
The Hydraloop device needs to be connected with an internal internet connected (wifi) network |
|
Noise Level |
Depending on the size of the installation |
CONNECTION OVERVIEW
Input connections
Main greywater inlet into the top of the Hydraloop device: 40 mm| 1 ½” OD
-
Bring all greywater sources into one dedicated line.
-
Please ensure all greywater lines are separated from black water.
-
If the greywater input is on a higher floor than the Hydraloop device, gravity will direct the flow.
-
In other circumstances, install a lift pump.
Greywater inlet to the Hydraloop device from
Shower
Bath
Tumble dryer
Air conditioning
Heat pump
Optional: Washing machine (only with inlet diverter)
You can connect only one (1) washing machine per Hydraloop device
Power/Network connections
Permanent WiFi internet connection:
Bandwidth of 2.4GHz or 5 GHz
Ethernet & Bluetooth (v 2.0)
Power supply: 100-120V (60Hz) or 200-240V
Outlet to be within 1.2 m of device
Backup water inlet
Tap water or other: 15 mm | ½” MNPT – flow of 12 LPM| 3.2 USGPM
If the flow rate is higher than 12LPM| 3.2 USGPM, floater cap and flow regulator.
If you use a rainwater pump, install an expansion vessel and 50-micron mesh pre-filter.
Output connections
Wastewater outlet
Connection to sewer: 40 mm| 1 ½” OD (min. of 50 mm| 2”) with rubber sleeve
Wastewater from the Hydraloop device to sewer (gravity) operates on a timer for wastewater release every 7 days
Toilet flushing (pressurized):
15 mm | ½” MNPT
Washing machine (pressurized):
15 mm | ½” MNPT
Auxiliary outlet (non-pressurized):
15 mm | ½” MNPT
a
For more information, please visit www.hydraloop.com