H600 PRODUCT DATA SHEET
With a Hydraloop device, you can recycle up to 95% of shower & bath greywater and optionally 50% of washing machine greywater – which enables you to reuse up to 45% of the total in-house domestic greywater. Due to its innovative and breakthrough technology, Hydraloop reusable water is clean, clear, safe and certified and for toilet flushing, washing machine, garden irrigation and/or swimming pool top-up.
Find the other factsheets for your desired device here
HYDRALOOP H600
H600 |
Input: Greywater from shower and bath Output: Two (2) valves for reusable water to the toilets and the washing machine Colour: Stone Front Plate: Stainless-steel front plate with white coloured logo and small status light |
H600 Premium |
Input: Greywater from shower and bath Output: Two (2) valves for reusable water to the toilets and the washing machine Choose from three colours: Dew, Chili and Stone Front Plate: Premium stainless-steel front plate with Hydraloop LED logo lights |
ADD-ONS
Output Garden |
One (1) extra valve for reusable water in the garden |
Output Pool |
One (1) extra valve for reusable water for the pool |
Lift pumps * |
DAB Novabox 30/300. This lift pump is submerged underneath the floor DAB Genix VT 030. |
*A lift pump is only necessary if Hydraloop device is positioned on same floor or a story higher as shower/bathtub.
*Please note: DAB pump listed above is not certified in NA
HYDRALOOP H600 SPECIFICATIONS
Volume |
600 liters / 160 gallons |
Cleaning capacity |
1000 liters / 260 gallons per day |
Dimensions |
80 cm wide, 69 cm deep, 187 cm high 31.5” wide, 27.5” deep, 74” high |
Voltage |
100 / 240V, 24V internal |
Usage |
40 W during treatment. Average power consumption: 350kWh/year |
WiFi |
The Hydraloop device needs to be connected with an internal WiFi-network |
Average reusable water quality |
Non-potablewater CBOD5(mg/L)<10 TSS(mg/L)<10 Turbidity(NTU<5) E.coli(MPN/100ml.)<14 PH(SU)6.0–9.0 |
Noise Level |
± 46 dB. |
LED LIGHT INDICATIONS
EXPLANATION VISUAL ALARM LIGHT AND AUDIBLE ALARM
Visual Alarm Notifications:
― ― ― ― ―
Blue light:
A blue light on the LED panel indicates that there is currently no reusable water available and backup water is being used for all functions.
― ― ― ― ―
Blue white alternate light:
A blue and white alternating light on the LED panel indicates that there is reusable water in storage tank (T3), but not enough for a full washing machine cycle.
― ― ― ― ―
White light:
A white light on the LED panel indicates that there is a sufficient volume of reusable water for all uses.
― ― ― ― ―
Green light:
A green light on the LED panel indicates that the first collection tank (T1) or storage tank (T3) is directing greywater directly to drain (waste). You now know that the device is in automatic cleaning mode.
― ― ― ― ―
Purple light:
A purple light on the LED panel indicates that the Hydraloop device is detecting that the washing machine is in operation.
― ― ― ― ―
Orange light:
An orange light on the LED panel indicates that there is an issue with the Hydraloop device, and the greywater is not being treated. Action needs to be taken.
― ― ― ― ―
Red light:
A red light on the LED panel indicates that there is an issue with the Hydraloop device, and no water can be distributed to the toilets and washing machine. Immediately contact your installer or Sales Engineer to begin the troubleshooting process.
Audible Alarm Notifications:
High water level warning:
Buzzer alarm 2 beeps every minute, visual alarm 2 pulses every minute
Air pump failure:
Buzzer alarm 3 beeps every minute, visual alarm 3 pulses every minute
UV lamp failure:
Buzzer alarm 4 beeps every minute, visual alarm 4 pulses every minute
Water storage tank re-disinfection circulation failure:
Buzzer alarm 5 beeps every minute, visual alarm 5 pulses every minute
Water distribution pump failure:
Buzzer alarm 6 beeps every minute, visual alarm 6 pulses every minute
If you need assistance, call your Hydraloop Partner, your installer or contact Hydraloop Sales Engineer via support@hydraloop.com.
CONNECTION OVERVIEW
Input connections
Main greywater inlet into the top of the Hydraloop device: 40 mm| 1 ½” OD
-
Bring all greywater sources into one dedicated line.
-
Please ensure all greywater lines are separated from black water.
-
If the greywater input is on a higher floor than the Hydraloop device, gravity will direct the flow.
-
In other circumstances, install a lift pump.
Greywater inlet to the Hydraloop device from
Shower
Bath
Tumble dryer
Air conditioning
Heat pump
Optional: Washing machine (only with inlet diverter)
You can connect only one (1) washing machine per Hydraloop device
Power/Network connections
Permanent WiFi internet connection:
Bandwidth of 2.4GHz or 5 GHz
Ethernet & Bluetooth (v 2.0)
Power supply: 100-120V (60Hz) or 200-240V
Outlet to be within 1.2 m of device
Backup water inlet
Tap water or other: 15 mm | ½” MNPT – flow of 12 LPM| 3.2 USGPM
If the flow rate is higher than 12LPM| 3.2 USGPM, floater cap and flow regulator.
If you use a rainwater pump, install an expansion vessel and 50-micron mesh pre-filter.
Output connections
Wastewater outlet
Connection to sewer: 40 mm| 1 ½” OD (min. of 50 mm| 2”) with rubber sleeve
Wastewater from the Hydraloop device to sewer (gravity) operates on a timer for wastewater release every 7 days
Toilet flushing (pressurized):
15 mm | ½” MNPT
Washing machine (pressurized):
15 mm | ½” MNPT
Auxiliary outlet (non-pressurized):
15 mm | ½” MNPT