H300 PRODUCT DATA SHEET

Download this document

With a Hydraloop device, you can recycle up to 95% of shower & bath water and optionally 50% of washing machine water – which enables you to reuse up to 45% of the total in-house domestic water. Due to its innovative and breakthrough technology, Hydraloop reusable water is clean, clear, safe and certified and for toilet flushing, washing machine, garden irrigation and/or swimming pool top-up.

Find the other factsheets for your desired device here

HYDRALOOP H300

Hydraloop H300 and H600 have been tested and certified under IAPMO R&T and NSF/ANSI 350

H300

Input: Greywater from shower and bath

Output: Two (2) valves for reusable water to the toilets and the washing machine

Colour: Stone

Front Plate: Stainless-steel front plate with white coloured logo and small status light

H300 Premium

Input: Greywater from shower and bath

Output: Two (2) valves for reusable water to the toilets and the washing machine

Choose from three colours: Dew, Chili and Stone

Front Plate: Premium stainless-steel front plate with Hydraloop LED logo lights

ADD-ONS

Output Garden (auxiliary outlet)	One (1) extra valve for reusable water in the garden
Output Pool (auxiliary outlet)	One (1) extra valve for reusable water for the pool
Washing Machine Option (diverter valve)	Option to recycle 50% of greywater from washing machine, including sanitary lift pump
Lift pumps *	DAB Novabox 30/300. This lift pump is submerged underneath the floor DAB Genix VT 030. This lift pump is on the floor.

*A lift pump is only necessary if Hydraloop device is positioned on same floor or a story higher as shower/bathtub

*Please note that the DAB pump listed is not certified to be sold into NA.

HYDRALOOP H300 SPECIFICATIONS

Volume	300 liters \| 80 gallons
Cleaning capacity	360 liters \| 95 gallons per day depending on user behaviour.
Voltage	100 / 240V, 24V internal
Average power consumption	220 kWh/year 25W during treatment
WiFi	The Hydraloop device needs to be connected with an internal WiFi-network
Noise Level	± 44 dB.
Greywater input sources	- shower - bath - washing machine (with inlet diverter)

H300 DIMENSIONS IN METRIC AND IMPERIAL

HYDRALOOP MODEL	HEIGHT (MM)	WIDTH (MM)	LENGTH (MM)	DRY WEIGHT (KG)	WET WEIGHT (KG)
H300	2045	335	810	82,5	383
H300 PACKAGED	2198	345	815	90,5	-
H300 DISPLAY MODEL	2045	335	810	40	-
H300 DISPLAY MODEL PACKAGED	2198	345	815	50	-

HYDRALOOP MODEL	HEIGHT (INCHES)	WIDTH (INCHES)	LENGTH (INCHES)	DRY WEIGHT (POUNDS)	WET WEIGHT (POUNDS)
H300	80.51	13.19	31.88	181.91	844.52
H300 PACKAGED	86.54	13.58	31.88	199.55	-
H300 DISPLAY MODEL	80.51	13.19	31.88	88.20	-
H300 DISPLAY MODEL PACKAGED	86.54	13.58	31.88	110.25	-

LED LIGHT INDICATIONS

EXPLANATION VISUAL STATUS LIGHT AND AUDIBLE ALARM

VISUAL STATUS INDICATIONS

White light:

A white light indicates that there is a sufficient volume of reusable water for all uses.

Blue light:

A blue light indicates that there is currently no reusable water available and backup water is being used for all purposes.
Blue white alternate light:

A blue and white alternating light indicates that there is reusable water in storage tank (T3), but not enough for a full washing machine cycle.

Green light:

A green light indicates that the Hydraloop device is in automatic cleaning mode.
Purple light:

A purple light indicates that the Hydraloop device is detecting that the washing machine is in operation.

Orange light:

An orange light indicates that that your Hydraloop device is currently not treating greywater has automatically switched over to backup water.
Since your device is monitored 24/7, your Hydraloop installer knows about this. If the status light does not change after 24 hours, please contact Hydraloop support in your Hydraloop app.

Red light:

A red light on the LED panel can indicate two things.
1. The Hydraloop device detects an issue with your toilets or washing machine.
2. There is an issue with the Hydraloop device, and no water can be distributed to the toilets and washing machine.
In case of a red light please open your Hydraloop app and contact Hydraloop directly.

AUDIBLE STATUS INDICATIONS

High water level:

Buzzer alarm 2 beeps every minute, visual alarm 2 pulses every minute

Air pump:

Buzzer alarm 3 beeps every minute, visual alarm 3 pulses every minute
UV lamp:

Buzzer alarm 4 beeps every minute, visual alarm 4 pulses every minute
Water storage tank re-disinfection circulation:

Buzzer alarm 5 beeps every minute, visual alarm 5 pulses every minute
Water distribution pump:

Buzzer alarm 6 beeps every minute, visual alarm 6 pulses every minute

If you need assistance, please call your Hydraloop installer or contact Hydraloop directly via support@hydraloop.com or the Hydraloop app.

CONNECTION OVERVIEW

Input connections

Main greywater inlet into the top of the Hydraloop device: 40 mm| 1 ½” OD

Bring all greywater sources into one dedicated line.
Please ensure all greywater lines are separated from black water.
If the greywater input is on a higher floor than the Hydraloop device, gravity will direct the flow.
In other circumstances, install a lift pump.

Greywater inlet to the Hydraloop device from

	H300 and H600	Shower and Bath
	H600	Tumble dryer, Air conditioning and Heat pump
	H300 and H600	Optional: Washing machine (only with inlet diverter) You can connect only one (1) washing machine per Hydraloop device

Power/Network connections

	Permanent WiFi internet connection: Bandwidth of 2.4GHz or 5 GHz Ethernet & Bluetooth (v 2.0)
	Power supply: 100-120V (60Hz) or 200-240V Outlet to be within 1.2 m of device
	Backup water inlet Tap water or other: 15 mm \| ½” MNPT – flow of 12 LPM\| 3.2 USGPM If the flow rate is higher than 12LPM \| 3.2 USGPM, floater cap and flow regulator. If you use a rainwater pump, install an expansion vessel and 50-micron mesh pre-filter.

Output connections

	Wastewater outlet Connection to sewer: 40 mm \| 1½” OD (min. of 50 mm \| 2”) with rubber sleeve Wastewater from the Hydraloop device to sewer (gravity) operates on a timer for wastewater release every 7 days
	Toilet flushing (pressurized): 15 mm \| ½” MNPT
	Washing machine (pressurized): 15 mm \| ½” MNPT
	Auxiliary outlet (non-pressurized): 15 mm \| ½” MNPT

	Wastewater outlet Connection to sewer: 40 mm \| 1½” OD (min. of 50 mm \| 2”) with rubber sleeve Wastewater from the Hydraloop device to sewer (gravity) operates on a timer for wastewater release every 7 days
	Toilet flushing (pressurized): 15 mm \| ½” MNPT
	Washing machine (pressurized): 15 mm \| ½” MNPT
	Auxiliary outlet (non-pressurized): 15 mm \| ½” MNPT